BIO-COMPOUND
Bio-compound takes many advantages of high impact resistance, durability and flexibility as well as ability to be used for diversified finished products such as mulch film, shopping bag, single-use gloves, 3D printing filament, etc.
Polylactic acid resin (PLA), impact modifier
| Item | Method | Unit | Value (4800S) | Value (4800) |
| Density (g/ml) | ASTM D792 | – | 1.1~1.18 | 1.15~1.2 |
| MFI (190℃/2.16kg) | ASTM D1238 | g/10min | 4~10 | 5~10 |
| HDT | ASTM D648 | ℃ | 50 | 50 |
| Tensile Yield Strength | ASTM D638 | Mpa | >35 | >38 |
| Tensile Elongation | ASTM D638 | % | >5 | >5 |
| Notched Izod impact (Notched) | ASTM D256 | J/m | >370 | >200 |
| Flexural Strength | ASTM D790 | Mpa | >58 | >40 |
12 months from date of production under proper storage conditions (room temperature of ~230C). If you need to open bags and use them partially, you are recommended to seal bags again properly and use it within 3 months. During transportation and storage, temperature should not exceed 700C at any time.
Other products?
Need more information?
Contact
